AK47/74 Accessories

A2Z Outdoors

AK47/74 Accessories

We offer a huge selection of firearms accessories for your AK Style rifle. We offer AK Folding Stocks, Cheek Rests, Mags, Bipods, Sights, Slings, Grips, Rails, Mounts, and much more. All of your AK47 Accessories are included on this page.

Guides and Manuals	Stocks	Grips and Handguards	Cheek Rests	Flashlight and Laser Mounts
Magazines and Magazine Accessories	Rails and Mounts	Bipods and Accessories	Slings	Sights
		Miscellaneous

Guides and Manuals for the AK47

Gun Guide for AK 47

• The only current printed manual that includes
information on ALL models.
• Easy to use -- Comb binding lies open and flat on your
work surface.
• 16 pages & 20+ high-resolution grayscale images.
• Cardstock cover. Bright white paper.

Item Number	Description	Price
GGAK47	Gun Guide for AK 47, Free Shipping	$9.00

AK47/74 Stocks

Choate MAK-90/AK-47 Dragunov Stock (Milled and Stamped Receiver Available)

Our Dragunov Design MAK-90/AK-47 stock features a convenient thumbhole design and our adjustable length of pull spacer system. This system allows you to adjust the length of pull from 13" to a 14 1/2" length by adding spacers. Other features include tough fiberglass filled polymer, black matte textured finish, 1" thick rubber recoil pad, Russian style steel sling mount pin and we include a matching upper and lower hand guard with our stocks. (You may order spacers and a matching cheek piece for scope use separately if needed.) Available for both milled and stamped receivers.

Order NOW!

Item Number	Description	Price
18-03-08	Choate MAK-90/AK-47 Dragunov Stock For Stamped Receiver	$59.00
18-03-06	Choate MAK-90/AK-47 Dragunov Stock For Milled Receiver	$59.00

AK-47 Strikeforce Stock in Desert Tan

6 Position Collapsible, Side Folding Strikeforce Stocks with Cheekrest and Buttpad

	6 Position Collapsible, Side Folding Stock
	Can Be Fired From Folded Position
	Removable/Adjustable Cheekrest (3/8”)
	Non-Slip, Removable Buttpad
	Slot for Tactical Sling Attachment
	2 Sling Swivel Studs
	DuPont® Extreme Temperature Glass Reinforced Polymer
	Manufactured in the USA
	Limited Lifetime Warranty

Fits: Most stamped receivers. Will not fit milled receivers.

Note: Folded position note: Sec. 922(R) applies. Conversion kit may only be utilized on AK’s using folding stocks prior to 11/90 or you must have enough compliance parts to be legal as a folder; assembly otherwise may be in violation of Sec. 922(R). Stocks, handguards and pistol grips are Manufactured in the USA and count towards compliance parts. Contact your local gun shops or shooting ranges for this and other compliance issues.

AK-47 Strikeforce Collapsible Buttstock, with Adjustable Cheekrest and Buttpad

Item Number	Description	Price
A.2.20.1226	Advanced Technology AK-47 Strikeforce Stock in Desert Tan	$46.00

AK-47 Strikeforce Stock, Handguards & Pistol Grip Package in Desert Tan

6 Position Collapsible/Side Folding Stock, Handguards & Pistol Grip Package with Cheekrest & Buttpad in Desert Tan

	6 Position Collapsible/Side Folding
	Removable/Adjustable Cheekrest (3/8”)
	Non-Slip, Checkered, Removable Buttpad
	NEW 3M Industrial Grade Self-Adhesive Soft Touch Cheekrest Pad
	Slot for Tactical Sling Attachment
	3 Sling Swivel Studs
	Can Be Fired From Folded Position
	Ergonomic, Textured and Ventilated Upper and Lower Handguards
	One 4” and Three 2” Picatinny Rails
	Blank Inserts for When Rails are Not in Use
	Improved Ventilation
	Ergonomic, Textured Pistol Grip
	DuPont® Extreme Temperature Glass Reinforced Polymer
	Manufactured in the USA
	Limited Lifetime Warranty

Fits: Most stamped receivers. Will not fit milled receivers.

Note:Folded position note: Sec. 922(R) applies. Conversion kit may only be utilized on AK’s using folding stocks prior to 11/90 or you must have enough compliance parts to be legal as a folder; assembly otherwise may be in violation of Sec. 922(R). Stocks, handguards and pistol grips are Manufactured in the USA and count towards compliance parts. Contact your local gun shops or shooting ranges for this and other compliance issues.

AK-47 Strikeforce Stock

Item Number	Description	Price
A.2.20.1225	Advanced Technology AK-47 Strikeforce Stock, Handguards & Pistol Grip Package in Desert Tan	$97.00

AK-47 Strikeforce Fixed Stock, Handguards & Pistol Grip Package

6 Position Fixed Stock, Handguards & Pistol Grip Package with Adjustable Cheekrest & Buttpad

	6 Position Collapsible Stock
	Non-Side Folding, Fixed Stock
	Removable/Adjustable Cheekrest (3/8”)
	Non-Slip, Checkered, Removable Buttpad
	NEW 3M Industrial Grade Self-Adhesive Soft Touch Cheekrest Pad
	Slot for Tactical Sling Attachment
	3 Sling Swivel Studs
	Ergonomic, Textured and Ventilated Upper and Lower Handguards
	One 4” and Three 2” Picatinny Rails
	Blank Inserts for When Rails are Not in Use
	Improved Ventilation
	Ergonomic, Textured Pistol Grip
	DuPont® Extreme Temperature Glass Reinforced Polymer
	Manufactured in the USA
	Limited Lifetime Warranty

Fits: Most stamped receivers. Will not fit milled receivers.

AK-47 Strikeforce Fixed Stock

Item Number	Description	Price
A.2.10.1035	Advanced Technology	$97.00

AK-47 Strikeforce Fixed Stock

6 Position Fixed Stock with Adjustable Cheekrest and Buttpad

	6 Position Collapsible Stock
	Non-Side Folding
	Removable/Adjustable Cheekrest (3/8”)
	Non-Slip, Checkered, Removable Buttpad
	NEW 3M Industrial Grade Self-Adhesive Soft Touch Cheekrest Pad
	Slot for Tactical Sling Attachment
	2 Sling Swivel Studs
	DuPont® Extreme Temperature Glass Reinforced Polymer
	Limited Lifetime Warranty

Fits: Most stamped receivers. Will not fit milled receivers.

AK-47 Strikeforce Fixed Stock

Item Number	Description	Price
A.2.10.1030	Advanced Technology	$49.00

AK-47 Ultimate Professional Strikeforce Stock Package

6 Position Collapsible/Side Folding Stock, Handguards & Pistol Grip Package with Aluminum Upgrade Package

6 Position Collapsible/Side Folding

Removable/Adjustable Cheekrest (3/8”)

Non-Slip, Removable Buttpad

NEW 3M Industrial Grade Self-Adhesive Soft Touch Cheekrest Pad

Slot for Tactical Sling Attachment

3 Sling Swivel Studs

Can Be Fired From Folded Position

Improved Ventilation

Ergonomic, Textured Pistol Grip

Ventilated Handguards

Blank Inserts for When Rails are Not in Use

Military Type III Anodized, 6061 T6 Aluminum

	One-4”, Two-2” and One-2” Swivel Stud Picatinny Rail
	6 Position Aluminum Commercial Buffer Tube
	Aluminum Adapter

Includes Steel Castle Nut & Steel Locking Ring

Limited Lifetime Warranty

Fits: Most stamped receivers. Will not fit milled receivers.

Note: Sec. 922(R) applies. Conversion kit may only be utilized on AK’s using folding stocks prior to 11/90 or you must have enough compliance parts to be legal as a folder; assembly otherwise may be in violation of Sec. 922(R). Stocks, handguards and pistol grips are Manufactured in the USA and count towards compliance parts. Contact your local gun shops or shooting ranges for this and other compliance issues.

AK-47 Ultimate Professional Stock and Aluminum Upgrade Package

Item Number	Description	Price
A.2.10.1090	Advanced Technology AK-47 Ultimate Professional Strikeforce Stock Package	$151.00

AK, MAK-90 Maadi Fiberforce Stock

Fiberforce Dragunov Design for Military Look & Style

FITS: AK, MAK-90 and MAADI (all AK-47 variants) 7.62 x 39 cal.

	Handguard
	Built-in Cheek Rest
	Thumbhole Grip
	Fits Milled and Stamped Receivers
	Ventilated Forend
	Dowel Sling Mount
	1” Extended Length
	Buttpad Available

	Ambidextrous
	Scratch Resistant
	Easy “Drop-In” Installation
	Weatherproof
	Matte Black
	Glass-Filled Nylon
	Made in USA
	Lifetime Warranty
	No Gunsmithing

AK, MAK-90 Maadi Fiberforce Stock \

Item Number	Description	Price
MAK0100	Advanced Technology AK, MAK-90 Maadi Fiberforce Stock	$69.00

AK Strikeforce Collapsible, Side Folding Buttstock w/Adjustable Cheekrest & Buttpad

• Six-Position Collapsible/Side Folding
• Folds to the Left Side of the Receiver (One Second Open/Close)
• Removable/Adjustable (3/8”) Cheekrest
• Removable Buttpad
• Store Extra Light/Laser/Batteries Inside Stock Tube
• May be fired from folded position
• Sling Swivel Studs
• Improved Ventilation

• Use Original Mounting Hardware for Installation
• Assembled in Fixed Position
• Virtually Indestructible
• Matte Black
• Glass-Filled Nylon
• Made in USA
• Lifetime Warranty
• No Gunsmithing

AK Strikeforce Collapsible Buttstock, with Adjustable Cheekrest and Buttpad

Item Number	Description	Price
AKA3600	Advanced Technology AK Strikeforce Collapsible Buttstock, with Adjustable Cheekrest and Buttpad	$49.00

AK 47 6 Position Aluminum Tube for Under-folding Stock

6 Positions Tube Conversion For Under Folding Stock. Aluminum Made
Now you can upgrade your under folding metal stock with a collapsible stock.

	Strongly fit to the AK.
	Buttstock distance locks tight & well secured.
	Major influence for stability.
	Much more user friendly than the original form.
	No gunsmith required • Mill-standard • Warranty: lifetime

Eligibility:
For Under Folding AK

Materials:
Made of Aluminum

Measurements:
Weight(gr): 250
Length(cm): 21
Diameter(mm):29.5

Item Number	Description	Price
CA-AKUFSA	Command Arms AK 47 6 Position Aluminum Tube for Under-folding Stock	$91.79

AK47 Stamped Receiver, 6 Position Aluminum Tube

	Strongly fit to the AK.
	Buttstock distance locks tight & well secured.
	Major influence for stability..
	Much more user friendly than the original form.
	No gunsmith required • Mill-standard • Warranty: lifetime

Item Number	Description	Price
CA-AKTS	Command Arms AK47 Stamped Receiver, 6 Position Aluminum Tube	$91.79

AK47 Milled Receiver, 6 Position Aluminum Tube

	Strongly fit to the AK.
	Buttstock distance locks tight & well secured.
	Major influence for stability.
	Much more user friendly than the original form.
	No gunsmith required • Mill-standard • Warranty: lifetime

Item Number	Description	Price
CA-AKTM	Command Arms AK47 Milled Receiver, 6 Position Aluminum Tube	$91.79

AK Stamped Receiver 6 Position Polymer Tube

	Made of extremely strong mold polymer.
	Strongly fit to the AK.
	Buttstock distance locks tight & well secured.
	Major influence for stability.
	Much more user friendly than the original form.
	No gunsmith required • Mill-standard • Warranty: 10 years

Item Number	Description	Price
CA-AKTSP	Command Arms AK Stamped Receiver 6 Position Polymer Tube	$39.99

AK Milled Receiver 6 Position Polymer Tube

	Made of extremely strong mold polymer.
	Strongly fit to the AK.
	Buttstock distance locks tight & well secured.
	Major influence for stability.
	Much more user friendly than the original form.
	No gunsmith required •
	Mill-standard
	Warranty: 10 years

Item Number	Description	Price
CA-AKTMP	Command Arms AK Milled Receiver 6 Position Polymer Tube	$39.99

Collapsible Stock & Buffer Tube Conversion. Alum+Poly Made

A better value – set of aluminum buffer tube (#AKUFSA) & collapsible Stock (#CBS).

	Strongly fit to the AK.
	Buttstock distance locks tight & well secured.
	Major influence for stability.
	Much more user friendly than the original form.
	No gunsmith required • Mill-standard • Warranty: 10 years

Eligibility:
For Under folding AK47/74

Materials:
Made of Alum+Poly

Measurements:
Weight(gr): 612

Item Number	Description	Price
CA-AKUFSA+CBS	Command Arms AK 47 Collapsible Stock & Buffer Tube Conversion. Alum+Poly Made, Black	$132.59
CA-AKUFSA+CBS-T	Command Arms AK 47 Collapsible Stock & Buffer Tube Conversion. Alum+Poly Made, Tan	$132.59
CA-AKUFSA+CBS-G	Command Arms AK 47 Collapsible Stock & Buffer Tube Conversion. Alum+Poly Made, Green	$132.59

Collapsible commercial spec buttstock. Polymer Made

Upgrade your original commercial spec collapsible buttstock with our innovative one.

	Storage compartment for CR123 batteries.
	Side Picatinny rail - allows addition of Adjustable cheek-rest (#ACP), mag' pouch (#MPS) or shell holder (#SSM).
	Rubber non-slip buttpad with tapered angle, allows faster shouldering & increased comfort with body armor.
	Two ultrasonically welded metal quick release sling mount points.
	All can be easily fit to both left/right handed users.
	Available for mill standard tube too (#CBSM).
	No gunsmith required • Mill-standard • Warranty: 10 years

Eligibility:
For Buffer Tubes

Materials:
Made of Polymer

Measurements:
Weight(gr): 360
Height(cm): 13
Length(cm): 19
Width(cm): 4.3
Diameter(mm): Commercial spec

Item Number	Description	Price
CA-CBS	Command Arms Collapsible commercial spec buttstock. Polymer Made, Black	$64.29
CA-CBSG	Command Arms Collapsible commercial spec buttstock. Polymer Made, Green	$64.29
CA-CBSTAN	Command Arms Collapsible commercial spec buttstock. Polymer Made, Tan	$64.29

Collapsible Butt Stock & Adjustable Cheek Rest. Polymer Made

A better value for the combination of a stock & cheek rest.

	Adjustable for height with thumb knob (2.4cm range).
	By moving horizontally along the Picatinny rail, allows proper eye relief of scoped rifles.
	All can be easily fit to both left/right handed users.
	No Gunsmith required • Mill-standard • Warranty: 10 years

Eligibility:
For Buffer tubes

Materials:
Made of Polymer

Measurements:
Weight(oz): 1.5

Item Number	Description	Price
CA-CBSACP	Collapsible Butt Stock (CBS) & Adjustable Cheek Rest (ACP). Polymer Made, Black	$93.00
CA-CBSACPG	Collapsible Butt Stock (CBS) & Adjustable Cheek Rest (ACP). Polymer Made, Green	$93.00
CA-CBSACPT	Collapsible Butt Stock (CBS) & Adjustable Cheek Rest (ACP). Polymer Made, Tan	$93.00

Mako RBT-K47 Collapsible Butt Stock Tube for AK 47 (polymer version)

Reinforced polymer AK47 buffer tube, converts your AK47/74 OEM stock to M16/M4 collapsible stock.

Fits AK47 stamped receivers.
No gun smiting required.
Construct from reinforced polymer.
Light weight.
Bolt on design for Easy fit, self adjustable to any stamped receiver, no drilling or carving required.
Buffer end expends inside the receiver when bolts are secured and eliminates any lose and rattling.
Super rugged design.
8 positions holes for best fit of the stock to your battle stanch.

Item Number	Description	Price
RBT-K47	Mako RBT-K47 Collapsible Butt Stock Tube for AK 47 (polymer version)	$33.95

Mako SBT-K47 Collapsible Butt Stock Tube w/ Shock Absorber for AK 47 (polymer version)

Recoil reducing ak47 buffer tube, converts your AK47/74 OEM stock to M16/M4 collapsible stock.
Fits AK47 stamped receivers.
No gun smiting required.
Construct from reinforced polymer.
Light weight.
Bolt on design for Easy fit, self adjustable to any stamped receiver, no drilling or carving required.
Buffer end expends inside the receiver when bolts are secure and eliminates any lose and rattling.
Super rugged design.
8 positions holes for best fit of the stock to your battle stanch.
Recoil reducing buffer, will improve accuracy and "targets in sights" under rapid fire rates.

Item Number	Description	Price
SBT-K47	Mako SBT-K47 Collapsible Butt Stock Tube w/ Shock Absorber for AK 47 (polymer version)	$61.10

Mako M4AK M4 Folding, Collapsible Buttstock for AK47

Converts your AK OEM stock to M16/M4 collapsible and side folding stock.
Stock manufactured to fit AK stamped receiver.
Hardened steel mill spec original GALIL folding mechanism that would last the most brutal abuse.
After market sized 6061 hard anodized aluminum buffer tube to fit any M4 stock with a sealed compartment.
Quick stock deployment.
Folds to the right side.
Ideal for use in confined spaces duo to it size when folded, and close-quarter confrontations duo to massive strength and ability to use gun as a baton.
The toughest folding stock ever!!!!

M4AK M4 Folding, Collapsible Buttstock for AK47

Item Number	Description	Price
M4AKB	Mako M4AK M4 Folding, Collapsible Buttstock for AK47, Black	$327.95
M4AKG	Mako M4AK M4 Folding, Collapsible Buttstock for AK47, Green	$327.95
M4AKT	Mako M4AK M4 Folding, Collapsible Buttstock for AK47, Tan	$327.95

Mako M4AKSB M4 Folding, Collapsible Buttstock w/ Shock Absorber for AK47

Converts your AK OEM stock to M16/M4 collapsible and side folding stock with our unique Shock Absorber Mechanism.
Stock manufactured to fit AK stamped receiver.
Hardened steel mill spec original GALIL folding mechanism that would last the most brutal abuse.
After market sized 6061 hard anodized aluminum buffer tube to fit any M4 stock with a sealed compartment.
Quick stock deployment.
Folds to the right side.
Ideal for use in confined spaces duo to it size when folded, and close-quarter confrontations duo to massive strength and ability to use gun as a baton.
The toughest folding stock ever!!!!

M4AKSB M4 Folding, Collapsible Buttstock w/ Shock Absorber for AK47

Item Number	Description	Price
M4AKSBB	Mako M4AKSB M4 Folding, Collapsible Buttstock w/ Shock Absorber for AK47, Black	$393.55
M4AKSBG	Mako M4AKSB M4 Folding, Collapsible Buttstock w/ Shock Absorber for AK47, Green	$393.55
M4AKSBT	Mako M4AKSB M4 Folding, Collapsible Buttstock w/ Shock Absorber for AK47, Tan	$393.55

Mako RBT-K47FK Collapsible Butt Stock for AK 47 (polymer version)

RBT-K47FK Collapsible Butt Stock for AK 47 (polymer version)

Item Number	Description	Price
RBTK47FKB	Mako RBT-K47FK Collapsible Butt Stock for AK 47 (polymer version), Black	$79.25
RBTK47FKG	Mako RBT-K47FK Collapsible Butt Stock for AK 47 (polymer version), Green	$79.25
RBTK47FKT	Mako RBT-K47FK Collapsible Butt Stock for AK 47 (polymer version), Tan	$79.25

Mako SBT-K47FK Collapsible Butt Stock w/ Shock Absorber for AK 47 (polymer version)

SBT-K47FK Collapsible Butt Stock w/ Shock Absorber for AK 47 (polymer version)

Item Number	Description	Price
SBTK47FKB	Mako SBT-K47FK Collapsible Butt Stock w/ Shock Absorber for AK 47 (polymer version), Black	$101.90
SBTK47FKG	Mako SBT-K47FK Collapsible Butt Stock w/ Shock Absorber for AK 47 (polymer version), Green	$101.90
SBTK47FKT	Mako SBT-K47FK Collapsible Butt Stock w/ Shock Absorber for AK 47 (polymer version), Tan	$101.90

AK47 Grips and Handguards

AK-47 Handguards in Desert Tan with Picatinny Rails

Upper and Lower Hanguards with Picatinny Rails an Blank Inserts

	Ergonomic
	Non-Slip Textured
	Ventilated Upper and Lower Handguards
	One 4" Picatinny Rails
	Three 2" Picatinny Rails
	Blank Inserts for When Rails are Not in Use
	Rails are Removable and Interchangeable
	Count Towards US Compliance Parts
	DuPont® Extreme Temperature Glass Reinforced Polymer
	Manufactured in the USA
	Limited Lifetime Warranty

Fits: Most AK Stamped Receivers

Note: Some Minor Modification may be Required.

AK Strikeforce Handguards (Upper and Lower) with Rails and Inserts

Item Number	Description	Price
A.5.20.2436	Advanced Technology AK-47 Handguards in Desert Tan with Picatinny Rails	$42.00

AK-47 Pistol Grip in Desert Tan

	Ergonomic, Textured Pistol Grip
	Virtually Indestructible
	Counts Towards US Compliance Parts
	Installs with Original Mounting Hardware (Screw & Nut)
	DuPont® Extreme Temperature Glass Reinforced Polymer
	Manufactured in the USA
	Limited Lifetime Warranty

Fits: Most Stamped Receivers

AK Strikeforce Pistol Grip in Desert Tan

Item Number	Description	Price
A.5.20.2435	Advanced Technology AK-47 Pistol Grip in Desert Tan	$19.00

AK Strikeforce Pistol Grip

• Ergonomic,Textured Pistol Grip
• Installs with Original Mounting Hardware (Screw & Nut)
• Counts Toward US Compliance Parts
• Virtually Indestructible
• Matte Black

• Glass-Filled Nylon
• Made in USA
• Lifetime Warranty
• No Gunsmithing

FITS: All AK Variants (Stamped Receivers)

Note: Some Mak-90 owners may need to purchase

AK Strikeforce Pistol Grip

Item Number	Description	Price
AKA3400	Advanced Technology AK Strikeforce Pistol Grip	$19.99

Forend Pistol Grip

	5 Position Ergonomic, Textured Pistol Grip
	Gives You Extra Support When Shooting
	DuPont® Extreme Temperature Glass Reinforced Polymer
	Limited Lifetime Warranty

Fits: Fits any Standard Picatinny Rail.

Forend Pistol Grip

Item Number	Description	Price
FPG0100	Advanced Technology Forend Pistol Grip	$22.00

AK Strikeforce Handguards (Upper and Lower) with Picatinny Rails & Inserts

	Ergonomic Design
	Non-Slip Design
	Ventilated Upper & Lower Handguards
	One 4" and Three 2" Picatinny Rails
	Molded Inserts for When Rails Are Not Used

	Rails are Removable and Interchangeable
	Sling Swivel Stud
	Count towards US Compliance Parts
	Made in USA
	Lifetime Warranty
	No Gunsmithing

Fits: All AK Variants (Stamped Receivers)

AK Strikeforce Handguards (Upper and Lower) with Rails and Inserts

Item Number	Description	Price
AKA3500	Advanced Technology AK Strikeforce Handguards (Upper and Lower) with Rails and Inserts	$39.00

AK, MAK-90 Handguard

	Ventilated Handguard
	DuPont® Extreme Temperature Glass Reinforced Polymer
	Limited Lifetime Warranty

Fits: Most AK variants, milled and stamped receivers.

AK Handguard

Item Number	Description	Price
MAK1600	Advanced Technology AK, MAK-90 Handguard	$19.00

Ergonomic Vertical Grip (Fits all Picatinny Rails)

Distinctive ergonomically designed tactical vertical grips.

• Facilitates natural fighting stance holds on your rifle
• Improved performance and reaction time, reduces “on target” time increases muzzle control during rapid fire
• Ergonomically designed with finger grooves
• Plugged storage compartment

Available in Desert Tan, Black, and OD Green

Item Number	Description	Price
CA-AVG	Command Arms AK-47 Ergonomic Vertical Grip, Black (Fits all Picatinny Rails)	$20.39
CA-AVGG	Command Arms AK-47 Ergonomic Vertical Grip, OD-Green (Fits all Picatinny Rails)	$20.39
CA-AVGT	Command Arms AK-47 Ergonomic Vertical Grip, Tan (Fits all Picatinny Rails)	$20.39

Quick Detachable Vertical Grip (with compartment for 3 Lithium 123 batteries)

Front Arm Vertical Grip With Waterproof Compartment. Polymer Made
Quick detach, mold polymer vertical grip.

	Utilizing a twist tightening design.
	Waterproof battery storage for 3 CR123 batteries.
	No gunsmith required • Mill-standard • Warranty: 10 years

Eligibility:
For Picatinny

Materials:
Made of Polymer

Measurements:
Weight(gr): 84
Height(cm): 12.2
Width(cm): 3.2

Shown on AR

Item Number	Description	Price
CA-BVG	Command Arms Forearms Quick Detachable Vertical Grip (with compartment for 3 Lithium 123 batteries), Black	$29.00
CA-BVGG	Command Arms Forearms Quick Detachable Vertical Grip (with compartment for 3 Lithium 123 batteries), OD Green	$29.00
CA-BVGT	Command Arms Forearms Quick Detachable Vertical Grip (with compartment for 3 Lithium 123 batteries), Tan	$29.00

Ergonomic Vertical Grip

Ergonomic vertical grip with rubber inserts & compartment. (The re-designed #AVG)

Mold polymer ergonomic grip.

	Providing a natural fighting stance.
	Incorporates a storage compartment.
	No tools required, captive thumb nut.

Eligibility:
For Picatinny

Materials:
Made of Polymer

Measurements:
Weight(gr): 110
Height(cm): 11
Width(cm): 4.2

Item Number	Description	Price
CA-EVG	Command Arms Ergonomic Vertical Grip, Black	$20.39
CA-EVGG	Command Arms Ergonomic Vertical Grip, Green	$20.39
CA-EVGT	Command Arms Ergonomic Vertical Grip, Green	$20.39

3 positions Forearm Grip. Polymer Made
Mold polymer three positions folding grip.

	Side push button, allows operator to switch between different grip positions.
	Screw tightening.
	No gunsmith required • Mill-standard • Warranty: 10 years

Eligibility:
For Picatinny

Materials:
Made of Polymer

Measurements:
Weight(gr): 120
Height(cm): 12
Width(cm): 4.2

Positions:
Total 3

Item Number	Description	Price
CA-FVG3	Command Arms 3 Position Vertical Grip, Black	$36.69
CA-FVG3G	Command Arms 3 Position Vertical Grip, Green	$36.69
CA-FVG3T	Command Arms 3 Position Vertical Grip, Green	$36.69

5 positions Forearm Grip. Polymer Made
Mold polymer five positions folding grip.

	Side push button, allows operator to switch between different grip positions.
	Screw tightening.
	No gunsmith required • Mill-standard • Warranty: Lifetime

Eligibility:
For Picatinny

Materials:
Made of Polymer

Measurements:
Weight(gr): 120
Height(cm): 12
Width(cm): 4.2

Positions:
Total 5

Item Number	Description	Price
CA-FVG5	Command Arms 5 Position Vertical Grip, Black	$50.49
CA-FVG5G	Command Arms 5 Position Vertical Grip, Green	$50.49
CA-FVG5T	Command Arms 5 Position Vertical Grip, Tan	$50.49

UPG Pistol Grip Attached To Pica' Adaptor. Aluminum+Polymer Made
The customizable forward grip.

Thumbnut allows quick attachment to Picatinny rail.

Six interchangeable rubberized finger grooves & backstraps.

Fully customizable for comfort & control.

Capped storage for small items.

Aluminum rail adaptor.

Based on #UPG47 pistol grip.

No gunsmith required • Mill-standard • Warranty: 10 years

Eligibility:
For Picatinny

Materials:
Made of Poly+Alum

Measurements:
Weight(gr): 160
Height(cm): 12.5
Width(cm):

Item Number	Description	Price
CA-IFG	Command Arms Vertical Forward Grip with Interchangeable Panels, Black	$73.39
CA-IFGG	Command Arms Vertical Forward Grip with Interchangeable Panels, Green	$73.39
CA-IFGT	Command Arms Vertical Forward Grip with Interchangeable Panels, Tan	$73.39

Side clip short vertical grip

	Incorporates a storage compartment.
	Screw tightened.

Eligibility:
For Picatinny

Materials:
Made of Polymer

Measurements:
Weight(gr): 60
Height(cm): 5.5
Width(cm): 3

Item Number	Description	Price
CA-TVG	Command Arms Thunder Three +1 Finger Vertical Forward Grip, Black	$14.99
CA-TVGG	Command Arms Thunder Three +1 Finger Vertical Forward Grip, Green	$14.99
CA-TVGT	Command Arms Thunder Three +1 Finger Vertical Forward Grip, Tan	$14.99

Side clip vertical grip

	Incorporates a storage compartment.
	Screw tightened.

Eligibility:
For Picatinny

Materials:
Made of Polymer

Measurements:
Weight(gr): 90
Height(cm): 11.2
Width(cm): 3

Item Number	Description	Price
CA-TVG1	Command Arms Thunder Three Finger Vertical Forward Grip, Black	$14.99
CA-TVG1G	Command Arms Thunder Three Finger Vertical Forward Grip, Green	$14.99
CA-TVG1T	Command Arms Thunder Three Finger Vertical Forward Grip, Tan	$14.99

Erogonomic Pistol Grip for AK47/Galil

Ergonomically designed with finger swell & backstrap
• Surfacing enhances grip & minimizes slippage when wet
• Beavertail for better control, higher & firmer hold
• Made from reinforced plastic composite

LIFETIME WARRANTY

Item Number	Description	Price
CA-AG47	Command Arms Ergonomic Pistol Grip for AK 47, Black	$29.99
CA-AG47G	Command Arms Ergonomic Pistol Grip for AK 47, Green	$29.99
CA-AG47T	Command Arms Ergonomic Pistol Grip for AK 47, Tan	$29.99

AK47 6 Piece Interchangeable Finger Groove Pistol Grip

6 piece interchangeable pistol grip for AK47 and similar type firearms. Grip incorporates multiple finger groove and palm swell inserts (3 each) allowing the user to customize their grip to fit all hand sizes for maximum comfort and control.

• Provides increased control during firing
• Finger grooves, palm swell and contoured backstrap allow and increased powerful grip
• Easily changeable front and rear rubberized grip inserts mount securely
• Mottled surface minimizes risk of slippage when wet
• Easily replaces standard grip
• Constructed of high density polymer
* Optional target stand (UPGS) sold separately

Optional Target Shooting Stand

Item Number	Description	Price
CA-UPG47	Command Arms AK47 6 Piece Interchangeable Finger Groove Pistol Grip, Black	$39.99
CA-UPG47G	Command Arms AK47 6 Piece Interchangeable Finger Groove Pistol Grip, Green	$39.99
CA-UPG47T	Command Arms AK47 6 Piece Interchangeable Finger Groove Pistol Grip, Tan	$39.99
CA-UPGS	Command Arms Target Stand for UPG47, Black	$14.29
CA-UPGSG	Command Arms Target Stand for UPG47, Green	$14.29
CA-UPGST	Command Arms Target Stand for UPG47, Tan	$14.29

Ergonomic vertical grip with rubber inserts & compartment. (The re-designed #SVG)

Polymer made.

	Incorporates a storage compartment.
	Rubberized front & back for comfortable
	non slip grip surface.
	No tools required, captive thumb nut.
	Removable pressure switch mounts.

Eligibility:
For Picatinny

Materials:
Made of Polymer

Measurements:
Weight(gr): 100
Height(cm): 8.5
Width(cm): 3.8

Item Number	Description	Price
CA-MVG	Command Arms Short Vertical Grip with Rubber gripping surfaces, Black	$20.39
CA-MVGG	Command Arms Short Vertical Grip with Rubber gripping surfaces, Green	$20.39
CA-MVGT	Command Arms Short Vertical Grip with Rubber gripping surfaces, Tan	$20.39

Front Arm Short Vertical Grip. Polymer Made

Mold polymer short vertical grip.

	Comfortable grip surface has control rings for a non-slip grip.
	Incorporates a storage compartment.
	Screw tightened.
	No gunsmith required • Mill-standard • Warranty: 10 years

Eligibility:
For Picatinny

Materials:
Made of Polymer

Measurements:
Weight(gr): 88
Height(cm): 9.6
Width(cm): 3.8

Item Number	Description	Price
CA-SVG	Command Arms Short Vertical Grip, Black	$20.39
CA-SVGG	Command Arms Short Vertical Grip, Green	$20.39
CA-SVGT	Command Arms Short Vertical Grip, Tan	$20.39

Two position folding grip.

Item Number	Description	Price
CA-FVG1	Command Arms 2 Position Folding Grip, Black	$29.99
CA-FVG1G	Command Arms 2 Position Folding Grip, Green	$29.99
CA-FVG1T	Command Arms 2 Position Folding Grip, Tan	$29.99

Mako FFA-T4 Flashlight Adapter with incorporated Grip

Nothing simmilar exists!
This Adapter is made for the Streamlight Stinger, Inova T4 and any other 1 1/8" diameter flashlight.
The adapter will fit any long weapon with a picatinny / weaver rail.
Features:

� Fits the Streamlight Stinger, Inova T4 and any other 1 1/8" diameter flashlight.
� Quick flashlight detachment. � Transforms a horizontal grip to a vertical grip for different shooting applications.
� When in horizontal position - just push grip open and it locks in Vertical position.
� When in vertical position - press button and fold back.
� Natural "fighting stance" hold on your rifle.
� Designed to mount on Picatinny or weaver rail.

FFA-T4 Flashligh Adapter with incorporated Grip

Item Number	Description	Price
FFA-TV	Mako FFA-T4 Flashlight Adapter with incorporated Grip	$79.90

Mako Grip Tactical Foregrip with 1 Inch Flashlight adapter and On/Off Trigger

This unique tactical grip allows the operator to use his 1" Flashlight.
. The most ergonomically designed vertical foregrip.
. Has storage compartment for batteries, cleaning kit...
. A 1" flashlight mount is incorporated along with an On/Off Trigger located on the grip itself.
(No need for bulky and pricy pressure switches.
. Fits any weapon with a weaver or picatinny rail.
. Mounted using a quick release locking system with an additional locking screw as backup.
. No gunsmithing required.
. Molded from reinforced polymer composite.
. Super lightweight.

Item Number	Description	Price
T-GripB	Mako Grip Tactical Foregrip with 1 Inch Flashlight adapter and On/Off Trigger, Black	$79.20
T-GripG	Mako Grip Tactical Foregrip with 1 Inch Flashlight adapter and On/Off Trigger, Green	$79.20
T-GripT	Mako Grip Tactical Foregrip with 1 Inch Flashlight adapter and On/Off Trigger, Tan	$79.20

Mako MIKI The world's most Ergonomic Flashlight adapter

The world's most ergonomically designed grip, featuring the most comfortable and natural "fighting stance".
. This unique grip permits several gripping positions, such as forearm, foregrip and many others. Most important is the way it fits perfectly in your hands.
. Designed to hold any 1 1/8" diameter flashlight like the Streamlight Stinger and Inova T4.
. Easy to fit on any firearm with a weaver or picatinnt rail.
. The flashlight is secured in the mount by a quick release locking system that allows quick mounting or removal of the flashlight, a real advantage for rechargable flashlights.
. No gunsmithing required.
. Molded from reinforced polymer composite.
. Super Lightweight.

MIKI The world's most Ergonomic Flashlight adapter

Item Number	Description	Price
MIKI118	Mako MIKI The world's most Ergonomic Flashlight adapter	$50.65

Mako T-GripR Tactical Foregrip with 1 Inch Flashlight adapter w/ rear Activation

This unique tactical grip allows the operator to use his 1" Flashlight.
. The most ergonomically designed vertical foregrip.
. Has storage compartment for batteries, cleaning kit...
. A 1" flashlight mount is incorporated along with an On/Off rear activation.
(No need for bulky and pricy pressure switches.
. Fits any weapon with a weaver or picatinny rail.
. Mounted using a quick release locking system with an additional locking screw as backup.
. No gunsmithing required.
. Molded from reinforced polymer composite. . Super lightweight.

T-GripR Tactical Foregrip with 1" Flashlight adapter w/ rear Activation

Item Number	Description	Price
TGRIPR	Mako T-GripR Tactical Foregrip with 1 Inch Flashlight adapter w/ rear Activation	$79.20

Mako FGG-S Tactical Folding Grip

� Transforms a horizontal grip to a vertical grip for different shooting applications.
� When in horizontal position - just push grip open and it locks in Vertical position.
� When in vertical position - press button and fold back.
� Natural "fighting stance" hold on your rifle.
� Designed to mount on Picatinny or weaver rail.
� Designed mount on most handguns
(In this case - you must register handgun with ATF an Any Other Weapon)
� Saftey extention to prevent slipping of hand when shooting with handgun.
� Reinforced plastic composite.
� Super light weight.
� No gunsmithing is required.

FGG-S Tactical Folding Grip

Item Number	Description	Price
FGG-SB	Mako FGG-S Tactical Folding Grip, Black	$41.25
FGG-SG	Mako FGG-S Tactical Folding Grip, Green	$41.25
FGG-ST	Mako FGG-S Tactical Folding Grip, Tan	$41.25

Mako AG-44S Ergonomic Quick Release Foregrip

• Easy to fit and secure - Quick Release button.
• Fits hand guards equipped with a Weaver or Picatinny rail system.
• Natural Fighting stance hold on your rifle - Slightly angeled to counter recolil.
• Improved performance in reaction, on target time and muzzle control during rapid fire.
• No gunsmithing is required.
• Quick Release mechanism.
• Moulded from reinforced plastic composite.
• Super lightweight.

AG-44S Ergonomic Quick Release Foregrip

Item Number	Description	Price
AG44-SB	Mako AG-44S Ergonomic Quick Release Foregrip, Black	$35.50
AG44-SG	Mako AG-44S Ergonomic Quick Release Foregrip, Green	$35.50
AG44-ST	Mako AG-44S Ergonomic Quick Release Foregrip, Tan	$35.50

Mako TAL-4 Tactical Vertical Grip

- No Slip Design
- Double sided pressure pad housing
- Internal water-proof battery compartment
- Quick-release attachment mechanism
- Additional locking screw option
- Durable and lightweight polymer construction
- Easy to mount, requires no gunsmithing
- Available soon in OD Green and Desert Tan

TAL-4 Tactical Vertical Grip

Item Number	Description	Price
TAL-4B	Mako TAL-4 Tactical Vertical Grip, Black	$37.30
TAL-4G	Mako TAL-4 Tactical Vertical Grip, Green	$37.30
TAL-4T	Mako TAL-4 Tactical Vertical Grip, Tan	$37.30

Mako T-POD Tactical Foregrip & Bipod

The T-Pod, our newest vertical grip, is based on the design of our very popular TAL-4 product, the foregrip we developed a little over a year ago at the request of the Drug Enforcement Agency (DEA). However, the T-Pod also includes an incorporated fully adjustable bipod, offering even more functionality!

	Aluminum bipod legs, adjust to 4 positions
	Dual pressure pad cutouts for light/laser pressure pads
	Quick-deploying mechanism provides a very stable bipod with a wide stance.

The T-POD is made in Israel by FAB Defense and features a lifetime warranty.

T-POD Tactical Foregrip & Bipod

Item Number	Description	Price
T-PODB	Mako T-POD Tactical Foregrip & Bipod, Black	$123.35
T-PODG	Mako T-POD Tactical Foregrip & Bipod, Green	$123.35
T-PODT	Mako T-POD Tactical Foregrip & Bipod,	$123.35

Mako TFLTactical Vertical Folding Grip w/ Storage Compartment

Quickly transforms from a horizontal grip to a vertical grip.

� Offers 7 different grip positions for various tactical shooting options.
� Grip can be slipped-on or side-mounted on a Picatinny rail.
� Large storage compartment.
� State-of-the-art ergonomic design.
� Heavy duty polymer construction.
� Fits all standard Picatinny rails.
� Available in the following camouflage colors: Black, Desert Tan, and Olive Drab Green.

TFL Tactical Vertical Folding Grip w/ Storage Compartment

Item Number	Description	Price
TFL-B	Mako TFLTactical Vertical Folding Grip w/ Storage Compartment, Black	$40.25
TFL-G	Mako TFLTactical Vertical Folding Grip w/ Storage Compartment, Green	$40.25
TFL-T	Mako TFLTactical Vertical Folding Grip w/ Storage Compartment, Tan	$40.25

Mako AG-47S Pistol Grip

* Advances ergonomic design.
* Though design and material.
* Built-in storage compartment.
* Improve trigger operation.

AG-47S Pistol Grip

Item Number	Description	Price
AG-47SB	Mako AG-47S Pistol Grip, Black	$29.35
AG-47SG	Mako AG-47S Pistol Grip, Green	$29.35
AG-47ST	Mako AG-47S Pistol Grip, Tan	$29.35

AK47 Cheek Rests

Adjustable Cheekrest

Can be adjusted 3/8"!

	Removable/Adjustable
	Used with Advanced Technology, Inc.’s Six-Position Collapsible Stock (MRW4100, MRF6200, MRF6200C)

FITS: ATI Six-Position Collapsible Stock

Adjustable Cheekrest

Item Number	Description	Price
MRW3700	Advanced Technology Adjustable Cheekrest	$12.99

Advanced Technology Soft Touch Cheekrest Pad for Shotforce Cheekrest

	3M Industrial Grade Self-Adhesive Cheekrest Pad
	Provides Extra Comfort When Shooting
	Manufactured in the USA
	Limited Lifetime Warranty

Fits: ATI's Shotforce Cheekrest

Soft Touch Cheekrest Pad

Item Number	Description	Price
A.5.10.2370	Advanced Technology Soft Touch Cheekrest Pad for Shotforce Cheekrest	$9.00

Universal (FN/FAL) Cheekrest

	Easy installation
	Installs to original wood stocks
	Raises eye level position for improved accuracy
	Mounts easily with included screws to any firearm
	Velcro strip may be used as an alternative to drilling stock
	Limited Lifetime Warranty

FITS: FN/FAL and many other wood or synthetic stocks

Universal (FN/FAL) Cheekrest

Item Number	Description	Price
UCR1900	Advanced Technology Universal (FN/FAL) Cheekrest	$9.00

Command Arms Adjustable Cheek Rest. Polymer Made

Fully adjustable cheek rest. Designed to mount on the #CBS butt stock’s Picatinny rail.

	Adjustable for height with thumb knob (2.4cm range).
	By moving horizontally along the Picatinny rail, allows proper eye relief of scoped rifles.
	All can be easily fit to both left/right handed users.
	Compatible with all #CBS style buttstocks & #PRFCS.
	No Gunsmith required • Mill-standard • Warranty: 10 years

Eligibility:
For Command Arms Stock CBS

Materials:
Made of Polymer

Measurements:
Weight(oz): 3.6
Height(cm): 9.1
Length(cm): 11.6

Item Number	Description	Price
CA-ACP	Command Arms Adjustable Cheek Rest, Black	$30.59
CA-ACPG	Command Arms Adjustable Cheek Rest, Green	$30.59
CA-ACPT	Command Arms Adjustable Cheek Rest, Tan	$30.59

Command Arms Cheek Rest

Cheek Rest For Existing Stock - 1.4cm Rise. Polymer Made

Raise your eye level for proper sight or optic alignment - raise: 1.4cm.

	Installs instantly on most collapsible stocks.
	Made of rugged glass reinforced polymer to withstand harsh tactical conditions.
	No tool installation, snaps into place.
	Fits “ribbed” collapsible style stocks.
	Ideal with #CBS butt stock.
	No Gunsmith required • Mill-standard • Warranty: 10 years

Eligibility:
For M4 style stocks

Materials:
Made of Polymer

Measurements:
Weight(gr): 50
Length(cm): 9.7
Width(cm): 5.4

Rise:
cm 1.4

Item Number	Description	Price
CA-CP1	Command Arms Cheek Rest, Black	$15.29
CA-CP1G	Command Arms Cheek Rest, Green	$15.29
CA-CP1T	Command Arms Cheek Rest, Tan	$15.29

Command Arms Cheek Rest For Existing Stock - 2.6cm Rise. Polymer Made

Raise your eye level for proper sight or optic alignment - raise: 2.6cm.

	Installs instantly on most collapsible stocks.
	Made of rugged glass reinforced polymer to withstand harsh tactical conditions.
	No tool installation, snaps into place.
	Fits “ribbed” collapsible style stocks.
	Ideal with #CBS butt stock.
	No Gunsmith required • Mill-standard • Warranty: 10 years

Eligibility:
For M4 style stocks

Materials:
Made of Polymer

Measurements:
Weight(gr): 56
Height(cm): 13.1
Length(cm): 6.5

Rise:
cm 2.6

Item Number	Description	Price
CA-CP2	Command Arms Cheek Rest For Existing Stock - 2.6cm Rise. Polymer Made. Black	$15.29
CA-CP2G	Command Arms Cheek Rest For Existing Stock - 2.6cm Rise. Polymer Made. Green	$15.29
CA-CP2T	Command Arms Cheek Rest For Existing Stock - 2.6cm Rise. Polymer Made.	$15.29

Flashlight and Laser Mounts

Command Arms Dual Aluminum Picatinny Mount For Laser & Light. Aluminum Made

At the same one-unit mount, you can strongly attach laser (19mm) & flashlight (25.4mm) to your weapon.

	Very slim design, keeps the accessories close to the weapon.
	Separate locking screw for each accessory.
	Allows rear thumb on/off operating, or remote switch.
	Can be mount to the weapon in many forms – left/right/top/bottom.
	Maintain zero.
	No gunsmith required • Mill-standard • Warranty: lifetime

Eligibility:
For Picatinny

Materials:
Made of Aluminum

Measurements:
Diameter(mm): 25.4mm & 19mm
Weight(gr): 70

Mechanism:
Lock Allen Key

Item Number	Description	Price
CA-AL134	Command Arms Dual Aluminum Picatinny Mount For Laser & Light. Aluminum Made	$55.00

Command Arms Aluminum 1.9cm Picatinny Mount For Laser & Light. Aluminum Made

Strong aluminum mount for both together - laser & flashlight.

	Very slim design, keeps the accessory close to the weapon.
	Allows rear thumb on/off operating or remote switch.
	Can be mount to the weapon in many forms – left/right/top/bottom.
	Made for body diameters: 19mm.
	Maintain zero.
	No gunsmith required • Mill-standard • Warranty: lifetime

Eligibility:
For Picatinny

Materials:
Made of Polymer

Measurements:
Diameter(mm): 19
Weight(gr): 70

Mechanism:
Lock Allen Key

Item Number	Description	Price
CA-AL34	Command Arms Aluminum 1.9cm Picatinny Mount For Laser & Light. Aluminum Made	$47.00

Screw tightened flashlight/laser mount. Low profile screw tightened
light/laser mount - 25.4mm.

Polymer made.

	Low profile & slim shape.
	Operator can easily access on/off button with thumb, while using a vertical grip.
	Slides & lock on rail.
	No gunsmith required • Mill-standard • Warranty: 10 years

Eligibility:
For Picatinny

Materials:
Made of Polymer

Measurements:
Diameter(mm): 25.4

Mechanism:
Lock Screw tightened

Item Number	Description	Price
CA-PLS1	Command Arms Screw tightened flashlight/laser mount. Low profile screw tightened light/laser mount - 25.4mm, black.	$29.00
CA-PLS1G	Command Arms Screw tightened flashlight/laser mount. Low profile screw tightened light/laser mount - 25.4mm, green.	$29.00
CA-PLS1T	Command Arms Screw tightened flashlight/laser mount. Low profile screw tightened light/laser mount - 25.4mm, tan.	$29.00

Command Arms Low profile screw tightened light/laser mount - 25.4mm.

Polymer made.

Quick release flashlight/laser mount.

	Operator can easily access on/off button with thumb, while using a vertical grip.
	Slides & lock on rail.
	No gunsmith required • Mill-standard • Warranty: 10 years

Eligibility:
For Picatinny

Materials:
Made of Polymer

Measurements:
Diameter(mm): 25.4

Mechanism:
Lock Quick Release

Item Number	Description	Price
CA-PLS1Q	Command Arms Low profile screw tightened light/laser mount - 25.4mm.	$29.00

Command Arms Low profile screw tightened light/laser mount - 19mm

Polymer made.

Screw tightened flashlight/laser mount.

	Operator can easily access on/off button with thumb, while using a vertical grip.
	screw lock on rail.
	No gunsmith required • Mill-standard • Warranty: 10 years

Eligibility:
For Picatinny

Materials:
Made of Polymer

Measurements:
Diameter(mm): 19

Mechanism:
Lock Screw Tightened

Item Number	Description	Price
CA-PLS34	Command Arms Low profile screw tightened light/laser mount - 19mm	$29.00

Command Arms 5 Positions Light/laser Mount -18-20.5mm. Polymer Made

Flashlight & laser mount, quickly locks in any of five positions for the user's comfort.

	Side clamp on to the Picatinny rail - screw lock.
	Change positions by simple action: push/pull/rotate.
	Locks in five positions: 0˚ 45˚ 90˚ 135˚ 180˚. Optional to screw-lock the position.
	Enables light to enter the room, while the operator maximizes the use of cover, regardless of which side room entry is desired.
	Operator can easily access on/off button with thumb, while using a vertical grip.
	Available in Push Button Quick Release (#UFH1Q).
	Includes extra pushbutton for pistol's under barrel style rails.
	No gunsmith required • Mill-standard • Warranty: 10 years

Eligibility:
For Picatinny

Materials:
Made of Polymer

Measurements:
Diameter(mm): 18-20.5
Weight(gr): 70

Mechanism:
Lock Allen Key

Item Number	Description	Price
CA-UFH1	Command Arms 5 Positions Light/laser Mount -18-20.5mm. Polymer Made, Black	$29.00
CA-UFH1G	Command Arms 5 Positions Light/laser Mount -18-20.5mm. Polymer Made, Green	$29.00
CA-UFH1T	Command Arms 5 Positions Light/laser Mount -18-20.5mm. Polymer Made,	$29.00

Command Arms 5 Positions Quick Release Light/laser Mount - 18-20.5mm. Polymer Made

Flashlight & laser mount, quickly locks in any of five positions for the user's comfort.

	Change positions by simple action: push/pull/rotate.
	Slide clamp on to the Picatinny rail - push button quick release lock.
	Locks in five positions: 0˚ 45˚ 90˚ 135˚ 180˚. Optional to screw-lock the position.
	Enables light to enter the room, while the operator maximizes the use of cover, regardless of which side room entry is desired.
	Operator can easily access on/off button with thumb, while using a vertical grip.
	Available in screw tightening (#UFH1).
	Includes extra pushbutton for pistol's under barrel style rails.
	No gunsmith required • Mill-standard • Warranty: 10 years

Eligibility:
For Picatinny

Materials:
Made of Polymer

Measurements:
Diameter(in): .71" - .81"
Weight(lbs): .15

Item Number	Description	Price
CA-UFH1P	Command Arms 5 Positions Quick Release Light/laser Mount - 18-20.5mm. Polymer Made, Black	$29.00
CA-UFH1PG	Command Arms 5 Positions Quick Release Light/laser Mount - 18-20.5mm. Polymer Made, Green	$29.00
CA-UFH1PT	Command Arms 5 Positions Quick Release Light/laser Mount - 18-20.5mm. Polymer Made, Tan	$29.00

Command Arms 5 Positions Light/laser Mount - 21.3-23.8mm. Polymer Made

Flashlight & laser mount, quickly locks in any of five positions for the user's comfort.

	Change positions by simple action: push/pull/rotate.
	Side clamp on to the Picatinny rail - screw lock.
	Locks in five positions: 0˚ 45˚ 90˚ 135˚ 180˚. Optional to screw-lock the position.
	Enables light to enter the room, while the operator maximizes the use of cover, regardless of which side room entry is desired.
	Operator can easily access on/off button with thumb, while using a vertical grip.
	Available in Push Button Quick Release (#UFH2Q).
	Includes extra pushbutton for pistol's under barrel style rails.
	No gunsmith required • Mill-standard • Warranty: 10 years

Eligibility:
For Picatinny

Materials:
Made of Polymer

Measurements:
Diameter(mm): 21.3-23.8
Weight(gr): 70

Mechanism:
Lock Allen Key

Item Number	Description	Price
CA-UFH2	Command Arms 5 Positions Light/laser Mount - 21.3-23.8mm. Polymer Made, Black	$29.00
CA-UFH2G	Command Arms 5 Positions Light/laser Mount - 21.3-23.8mm. Polymer Made, Green	$29.00
CA-UFH2T	Command Arms 5 Positions Light/laser Mount - 21.3-23.8mm. Polymer Made,	$29.00

Command Arms 5 Positions Quick Release Light/laser Mount - 21.3-23.8mm. Polymer Made

Flashlight & laser mount, quickly locks in any of five positions for the user's comfort.

	Change positions by simple action: push/pull/rotate.
	Slide clamp on to the Picatinny rail - push button quick release lock.
	Locks in five positions: 0˚ 45˚ 90˚ 135˚ 180˚. Optional to screw-lock the position.
	Enables light to enter the room, while the operator maximizes the use of cover, regardless of which side room entry is desired.
	Operator can easily access on/off button with thumb, while using a vertical grip.
	Available in screw tightening (#UFH2).
	Includes extra pushbutton for pistol's under barrel style rails.
	No gunsmith required • Mill-standard • Warranty: 10 years

Eligibility:
For Picatinny

Materials:
Made of Polymer

Measurements:
Diameter(in): .84" - .94"
Weight(lbs): .15

Mechanism:
Lock Quick Button

Item Number	Description	Price
CA-UFH2P	Command Arms 5 Positions Quick Release Light/laser Mount - 21.3-23.8mm. Polymer Made, Black	$29.00
CA-UFH2PG	Command Arms 5 Positions Quick Release Light/laser Mount - 21.3-23.8mm. Polymer Made, Green	$29.00
CA-UFH2PT	Command Arms 5 Positions Quick Release Light/laser Mount - 21.3-23.8mm. Polymer Made,	$29.00

Command Arms 5 Positions Light/laser Mount - 24.4-27mm. Polymer Made

Flashlight & laser mount, quickly locks in any of five positions for the user's comfort.

	Change positions by simple action: push/pull/rotate.
	Side clamp on to the Picatinny rail - screw lock.Locks in five positions: 0˚ 45˚ 90˚ 135˚ 180˚. Optional to screw-lock the position.
	Enables light to enter the room, while the operator maximizes the use of cover, regardless of which side room entry is desired.
	Operator can easily access on/off button with thumb, while using a vertical grip.
	Available in Push Button Quick Release (#UFH3Q).
	Includes extra pushbutton for pistol's under barrel style rails.
	No gunsmith required • Mill-standard • Warranty: 10 years

Eligibility:
For Picatinny

Materials:
Made of Polymer

Measurements:
Diameter(mm): 24.4-27
Weight(gr): 70

Mechanism:
Lock Allen Key

Item Number	Description	Price
CA-UFH3	Command Arms 5 Positions Light/laser Mount - 24.4-27mm. Polymer Made, Black	$29.00
CA-UFH3G	Command Arms 5 Positions Light/laser Mount - 24.4-27mm. Polymer Made, Green	$29.00
CA-UFH3T	Command Arms 5 Positions Light/laser Mount - 24.4-27mm. Polymer Made,	$29.00

Command Arms 5 Positions Light/laser Mount - 28.2-30.5mm. Polymer Made

Flashlight & laser mount, quickly locks in any of five positions for the user's comfort.

	Change positions by simple action: push/pull/rotate.
	Side clamp on to the Picatinny rail - screw lock.
	Locks in five positions: 0˚ 45˚ 90˚ 135˚ 180˚. Optional to screw-lock the position.
	Enables light to enter the room, while the operator maximizes the use of cover, regardless of which side room entry is desired.
	Operator can easily access on/off button with thumb, while using a vertical grip.
	Available in Push Button Quick Release (#UFH4@).
	Includes extra pushbutton for pistol's under barrel style rails.
	No gunsmith required • Mill-standard • Warranty: 10 years

Eligibility:
For Picatinny

Materials:
Made of Polymer

Measurements:
Diameter(mm): 28.2-30.5
Weight(gr): 70

Mechanism:
Lock Allen Key

Item Number	Description	Price
CA-UFH4	Command Arms 5 Positions Light/laser Mount - 28.2-30.5mm. Polymer Made, Black	$29.00
CA-UFH4G	Command Arms 5 Positions Light/laser Mount - 28.2-30.5mm. Polymer Made, Green	$29.00
CA-UFH4T	Command Arms 5 Positions Light/laser Mount - 28.2-30.5mm. Polymer Made,	$29.00

Command Arms 5 Positions Quick Release Light/laser Mount - 28.2-30.5mm. Polymer Made

Flashlight & laser mount, quickly locks in any of five positions for the user's comfort.

	Change positions by simple action: push/pull/rotate.
	Slide clamp on to the Picatinny rail - push button quick release lock.
	Locks in five positions: 0˚ 45˚ 90˚ 135˚ 180˚. Optional to screw-lock the position.
	Enables light to enter the room, while the operator maximizes the use of cover, regardless of which side room entry is desired.
	Operator can easily access on/off button with thumb, while using a vertical grip.
	Available in screw tightening (#UFH4).
	Includes extra pushbutton for pistol's under barrel style rails.
	No gunsmith required • Mill-standard • Warranty: 10 years

Eligibility:
For Picatinny

Materials:
Made of Polymer

Measurements:
Diameter(in): 1.11" - 1.20"
Weight(lbs): .15

Mechanism:
Lock Quick Button

Item Number	Description	Price
CA-UFH4P	Command Arms 5 Positions Quick Release Light/laser Mount - 28.2-30.5mm. Polymer Made, Black	$29.00
CA-UFH4PG	Command Arms 5 Positions Quick Release Light/laser Mount - 28.2-30.5mm. Polymer Made, Green	$29.00
CA-UFH4PT	Command Arms 5 Positions Quick Release Light/laser Mount - 28.2-30.5mm. Polymer Made,	$29.00

Mako PLA1 1 & 1 1/8 Inch Tactical Flashlight Mount - Quick Release

• Exceptional design detail.
• 1 inch bore - fits most 1" flashlights (Surefire, Pelican, Beamshot....).
• Fits all types of Picatinny rails.
• Efficient and easy to fit.
• Quick release mechanism.
• Special angle-lip design for easy flashlight slide in.
• Moulded from reinforced plastic composite.

PLA1 1" Tactical Flashlight Mount - Quick Release

Item Number	Description	Price
PLA1	Mako PLA1 1 Inch Tactical Flashlight Mount - Quick Release	$24.00

Mako PLS1 Tactical side mount for 1 Inch diameter flashlights

PLS1 Tactical side mount for 1" diameter flashlights

Item Number	Description	Price
PLS1	Mako PLS1 Tactical side mount for 1 Inch diameter flashlights	$29.35

AK 47 Magazines and Magazine Accessories

Butler Creek LULA Loader AK 47/GALIL

Turn on the fastest, most comfortable loading experience possible. The lever engages spring, so rounds slide in and out effortlessly – no finger or mag abuse. Slips on and off your mag with ease. LULA is a trademark of Maglula Ltd. and is used by permission. Made in Israel.

Quick magazine loading without thumb pain! Protect your fingers and your mags. Simply attach the Butler Creek Lula loader on top of your magazine to easily load and unload 7.62mm rounds.

Item Number	Description	Price
24216	Butler Creek LULA Loader AK 47/GALIL	$28.00

ProMag AK-47 Magazine, 7.62X39, 30 Round Black, Polymer

Designed and engineered for the AK-47 the Pro-Mag clip provides fast, reliable ammo delivery.

Item Number: AK-01
Caliber: 7.62x39
Color: Black Polymer
Capacity: 30 Rounds

Cannot Ship to: CA, Denver CO, Vail CO, DC, HI, Aurora IL, Chicago IL, Cicero IL, Franklin Park IL, OakPark IL, MA, MD, NJ, NY, Cincinnati OH, Columbus OH, Dublin OH, Shaker Heights OH, Toledo OH

Item Number	Description	Price
AK-A1	ProMag AK-47 Magazine, 7.62X39, 30 Round Black, Polymer. Cannot Ship to: CA, Denver CO, Vail CO, DC, HI, Aurora IL, Chicago IL, Cicero IL, Franklin Park IL, OakPark IL, MA, MD, NJ, NY, Cincinnati OH, Columbus OH, Dublin OH, Shaker Heights OH, Toledo OH	$14.00

ProMag AK-47 Magazine, 7.62X39, 30 Round Steel, Blued

Pro Mag Magazine

- Model: AK-47
- Caliber: 7.62x39mm
- Capacity: 30 Round
- Color/Material: Blue/Steel
- Made in USA

Cannot Ship to: CA, Denver CO, Vail CO, DC, HI, Aurora IL, Chicago IL, Cicero IL, Franklin Park IL, OakPark IL, MA, MD, NJ, NY, Cincinnati OH, Columbus OH, Dublin OH, Shaker Heights OH, Toledo OH

Item Number	Description	Price
AK-S30	ProMag AK-47 Magazine, 7.62X39, 30 Round Steel, Blued. Cannot Ship to: CA, Denver CO, Vail CO, DC, HI, Aurora IL, Chicago IL, Cicero IL, Franklin Park IL, OakPark IL, MA, MD, NJ, NY, Cincinnati OH, Columbus OH, Dublin OH, Shaker Heights OH, Toledo OH	$31.00

ProMag AK-47 Magazine, 7.62X39, 30 Round Coyote Brown, Polymer

Pro Mag Magazine

- Model: AK-47
- Caliber: 7.62x39mm
- Capacity: 30-Round Magazine
- Color/Material: Coyote Brown, Polymer

Cannot Ship to: CA, Denver CO, Vail CO, DC, HI, Aurora IL, Chicago IL, Cicero IL, Franklin Park IL, OakPark IL, MA, MD, NJ, NY, Cincinnati OH, Columbus OH, Dublin OH, Shaker Heights OH, Toledo OH

Item Number	Description	Price
AK-A2	ProMag AK-47 Magazine, 7.62X39, 30 Round Coyote Brown, Polymer. Cannot Ship to: CA, Denver CO, Vail CO, DC, HI, Aurora IL, Chicago IL, Cicero IL, Franklin Park IL, OakPark IL, MA, MD, NJ, NY, Cincinnati OH, Columbus OH, Dublin OH, Shaker Heights OH, Toledo OH	$14.00

ProMag AK-47 Magazine, 7.62X39, 30 Round Clear, Polymer

Pro Mag Magazine

Model: AK-47
Caliber: 7.62x39mm
Capacity: 30 Round
Material/Color: Polymer/Clear

Cannot Ship to: CA, Denver CO, Vail CO, DC, HI, Aurora IL, Chicago IL, Cicero IL, Franklin Park IL, OakPark IL, MA, MD, NJ, NY, Cincinnati OH, Columbus OH, Dublin OH, Shaker Heights OH, Toledo OH

Item Number	Description	Price
AK-A7	ProMag AK-47 Magazine, 7.62X39, 30 Round Clear, Polymer. Cannot Ship to: CA, Denver CO, Vail CO, DC, HI, Aurora IL, Chicago IL, Cicero IL, Franklin Park IL, OakPark IL, MA, MD, NJ, NY, Cincinnati OH, Columbus OH, Dublin OH, Shaker Heights OH, Toledo OH	$15.00

ProMag AK-223 30Rnd Polymer

Designed and engineered for the AK-47, the Pro-Mag clip provides fast, reliable ammo delivery.

ProMag Magazine AK-223 223 Remington 30-Round Polymer Black

These ProMag magazine bodies and followers are injection molded from strong, lightweight polymer. The springs are precision wound using heat-treated chrome silicon wire. The result is quality, consistency, durability and reliability.

Cannot ship to: CA, Denver CO, Vail CO, DC, HI, Aurora IL, Chicago IL, Cicero IL, Franklin Park IL, Oak Park IL, MA, MD, NJ, NY, Cincinnati OH, Cleveland OH, Columbus OH, Dublin OH, Shaker Heights OH, Toledo OH

Item Number	Description	Price
AK-A5	ProMag AK-223 30Rnd Polymer Cannot ship to: CA, Denver CO, Vail CO, DC, HI, Aurora IL, Chicago IL, Cicero IL, Franklin Park IL, Oak Park IL, MA, MD, NJ, NY, Cincinnati OH, Cleveland OH, Columbus OH, Dublin OH, Shaker Heights OH, Toledo OH	$17.00

ProMag AK-47 Magazine Clamp, 4 Pack Polymer or Metal

AK-47 Polymer or Magazine Clamps, 4-Pack Allows you to clamp two magazines together for a handy quick magazine chane.

Item Number	Description	Price
PM016A	ProMag AK-47 Magazine Clamp, 4 Pack Polymer	$13.00
PM016	ProMag AK-47 Magazine Clamp, 4 Pack Metal	$13.00

AK-47 Mag Covers

	Protects mag feed lips and ammo from dirt, dust or moisture
	Black & Flexible

FITS: 7.62 x 39 AK-47 Magazines AK-47 Mag Covers

Mag Cover for AK/MAK-90 (7.62x39mm) (4pk)

Item Number	Description	Price
MAK0762	Advanced Technology Mag Cover for AK/MAK-90 (7.62x39mm) (4pk)	$9.99

Command Arms Quick magazine removal

Polymer made.

Now you can easily drop & reload quickly the AK magazine.

	Operates with only one finger.
	Fits for both – left/right handed users.
	No gunsmith required • Mill-standard • Warranty: 10 years

Eligibility:
For AK47/74

Materials:
Made of Polymer

Item Number	Description	Price
AKMR	Command Arms Quick magazine removal	$14.99

Command Arms Magazine Coupler

7.62X39 Magazine Coupler. Polymer Made

	Each magazine can be placed in a different height.
	Wide gap - makes it easy to reload.
	Mad of high density polymer - very light.
	Will not scratch or deform magazines.
	Screw tightened.
	No Gunsmith required • Mill-standard • Warranty: 10 years

Eligibility:
For 7.62X39 magazine

Materials:
Made of Polymer

Measurements:

Item Number	Description	Price
MC47	Command Arms Magazine Coupler	$14.99

Rails and Mounts

Command Arms 3 Picatinny Hand Guard Rail With Thermal

Plastic Covers - Lower Part. Aluminum Made

The lower part (total of 3 rails) provides the solution for mounting grips, lights, lasers, pods & other mounts.

	Provide an exceptional design that allows numerous mission specific accessories, including bipods, vertical grips lasers, lights & more.
	Securely mounts to weapon effectively.
	Allows disassembling/assembling the AK body.
	Can be used individually or in conjunction with other parts of the complete #X47-SET.
	Compatible with most AK style rifles.
	Rail covers included.
	No gunsmith required • Mill-standard • Warranty: lifetime

Eligibility:
For AK47/74

Materials:
Made of Aluminum

Measurements:
Weight(gr): 170
Height(cm): 4.3
Length(cm): 17.9
Width(cm): 5.1

Rails:
Total 3

Item Number	Description	Price
X47B	Command Arms 3 Picatinny Hand Guard Rail With Thermal	$44.00

Command Arms Lower Hand guard with 3 picatinny rails

Lower hand guard provides 3 rails as the solution for
mounting grips, lights, lasers, pods & other mounts. Compatible with the original upper hand guard.

Made Of: Polymer

Weight (oz.): 6.72

Width Max (in.): 2.5”

Length (in.): 5.375”

Height (in.): 1.75”

Bottom rail: 4.5”

Item Number	Description	Price
RS47B	Command Arms Lower Hand guard with 3 picatinny rails, Black	$42.00
RS47BG	Command Arms Lower Hand guard with 3 picatinny rails, Green	$42.00
RS47BTAN	Command Arms Lower Hand guard with 3 picatinny rails,	$42.00

Command Arms Upper Hand Guard

Upper hand guard provides a single rail for red-point sights & other mounts. Compatable with the original lower handguard.
Upper Handguard with Picatinny rail

Compatible with: AK47/74

Item Number	Description	Price
RS47T	Command Arms Upper Hand Guard, Black	$40.00
RS47TG	Command Arms Upper Hand Guard, Green	$40.00
RS47TTAN	Command Arms Upper Hand Guard,	$40.00

Command Arms Upper and Lower Handguard Combo

Polymer two-piece handguard, provides a rigid lightweight platform to mount Picatinny accessories.
Two full length upper & lower Picatinny rails. Compatible with most AK style rifles.

Available as a complete set (#RS47SET) or separately (#RS47T & RS47B).

	Picatinny Hand Guard Rail System
	Excellent mounting positions for optics, bipods & grips.
	Two 3” mini side rails are ideal for mounting light/laser devices.
	Constructed of high density polymer for strength & heat resistance.

Item Number	Description	Price
RS47SET	Command Arms Upper and Lower Hand Guard, Black	$78.00
RS47SETG	Command Arms Upper and Lower Hand Guard, Green	$78.00
RS47SETTAN	Command Arms Upper and Lower Hand Guard,	$78.00

2 Inch Aluminum Picatinny Rail with Swivel Stud

	Military Type III Anodized, 6061 T6 Aluminum
	Mount All of Your Favorite Accessories
	Limited Lifetime Warranty

Item Number	Description	Price
A.5.10.2000	Advanced Technology 2 Inch Aluminum Picatinny Rail with Swivel Stud	$11.00

2 Inch Aluminum Picatinny Rail

	Military Type III Anodized, 6061 T6 Aluminum
	Mount All of Your Favorite Accessories
	Limited Lifetime Warranty

Item Number	Description	Price
A.5.10.2060	Advanced Technology 2 Inch Aluminum Picatinny Rail	$9.00

Advanced Technology 4 Inch AK-47 Aluminum Top Picatinny Rail

	Military Type III Anodized, 6061 T6 Aluminum
	Mount All of Your Favorite Accessories
	Limited Lifetime Warranty

Fits: ATI's AK-47 Strikeforce Handguards

Item Number	Description	Price
A.5.10.2070	Advanced Technology 4 Inch AK-47 Aluminum Top Picatinny Rail	$15.00

Mako AKU-47 Upper Handguard Rail System for AK47/74

Upper Hand guard Accessory rail system for the AK47 compliant with MIL-STD 1913. Specifically designed and manufactured to provide a rigid ultra-light platform on which to mount virtually any mission specific accessory.

Features:

* Upper Rail feature � to MIL-STD 1913.
* 3 Picatinny Rails for Sights, Scopes, Lasers and falshlights.
* No Gunsmithing required.
* Manufactured from Reinforced plastic composite.
* Super light weight.
* Matching Lower Rail System Available.
* Choice of 3 colours: Black, Green OD and Desert Tan.

AKU-47 Upper Handguard Rail System for AK47/74

Item Number	Description	Price
AKU-47B	Mako AKU-47 Upper Handguard Rail System for AK47/74, Black	$34.15
AKU-47G	Mako AKU-47 Upper Handguard Rail System for AK47/74, Green	$34.15
AKU-47T	Mako AKU-47 Upper Handguard Rail System for AK47/74,Tan	$34.15

Mako AKL-47 Lower Handguard Rail System for AK47/74

Lower Hand guard Accessory rail system for the AK47 compliant with MIL-STD 1913. Specifically designed and manufactured to provide a rigid ultra-light platform on which to mount virtually any mission specific accessory.

Features:

* Lower Rail feature � to MIL-STD 1913.
* No Gunsmithing required.
* Manufactured from Reinforced plastic composite.
* Super light weight.
* Matching Upper Rail System Available.
* Choice of 3 colours: Black, Green OD and Desert Tan.

Life time warranty

AKL-47 Lower Handguard Rail System for AK47/74

Item Number	Description	Price
AKL-47B	Mako AKL-47 Lower Handguard Rail System for AK47/74, Black	$40.00
AKL-47G	Mako AKL-47 Lower Handguard Rail System for AK47/74, Green	$40.00
AKL-47T	Mako AKL-47 Lower Handguard Rail System for AK47/74, Tan	$40.00

Mako AKLU-47 Handguard Rail System for AK47/74 - Lower & Upper

AKL-47 Lower Handguard Rail System for AK47/74

Item Number	Description	Price
AK-L/UB	Mako AKLU-47 Handguard Rail System for AK47/74 - Lower & Upper, Black	$69.55
AK-L/UG	Mako AKLU-47 Handguard Rail System for AK47/74 - Lower & Upper, Green	$69.55
AK-L/UT	Mako AKLU-47 Handguard Rail System for AK47/74 - Lower & Upper, Tan	$69.55

Mako VFR-AK AK 47 Aluminum Rail System

	compatible with most AK types available in the market
	scope rail is easy to mount or remove and mounted on the side rail of the lower hand guard , system will operate with or with out it
	Milled from 6061 T6 billet Aluminum, Hard coat anodized
	Conforms to MIL-STD 1913
	No modification or gunsmithing required.
	most rigid platform available today for AK
	unique mounting system that really eliminates moves of the system in any conditions

Item Number	Description	Price
VFR-AK	Mako VFR-AK AK 47 Aluminum Rail System	$351.35

ProMag AK47/SAIGA/STGDrgnv/SdRlPctyScpMt

The mount attaches directly to AK-47 type rifle with the attaching iron of the left hand side of the receiver. Accepts Weaver style rings on the Picatinny rail.

Item Number	Description	Price
PM092A	ProMag AK47/SAIGA/STGDrgnv/SdRlPctyScpMt	$32.00

Bipods and Accessories

Command Arms Lower Picatinny Rail Mount Base For Command Arms Bipod

If you have a lower Picatinny rails on your weapon, with the #NB you can fit the CAA bi-pods (#NBP / #NBPS)
on a lower position, so the center of gravity is now even more sable.

	Keeps the lower handguard clean for accessories.
	The whole mechanism is well covered.
	No Gunsmith required • Mill-standard • Warranty: 10 years

Eligibility:
For Picatinny

Materials:
Made of Alum+Poly

Item Number	Description	Price
CA-BASE	Command Arms Lower Picatinny Rail Mount Base For Command Arms Bipod	$58.00

Command Arms Picatinny Below Mounted Detachable Bi-Pods. Aluminum Made

Versatile bipod, mounts onto a Picatinny rail. Ideal for snipers, sharpshooters & other missions.

	Legs can be attached/detached with two swift movements.
	Due to the included #RB adaptor, allows Picatinny rail for the addition of forearm grip & other devices.
	New recessed design, allows legs to be mounted higher, giving a more stable center of gravity.
	Comfortable rubber covers legs, allowing a non-slip grip.
	Operating the pods separately. Each pod is not depending on the other at all.
	Quick release push button leg extension.
	Legs manufactured from stainless steel.
	No external springs - the whole mechanism is well covered.
	Redesigned feet provide increased stability.
	Legs can be folded to the front or back.
	Strong lightweight design.
	No Gunsmith required • Mill-standard • Warranty: 10 years

Eligibility:
For Picatinny / #SB

Materials:
Made of Stainless+Poly

Measurements:
Weight(gr): 425
Height Open(cm): 17.5
Height Close(cm): 24.6

Item Number	Description	Price
CA-NBP	Command Arms Picatinny Below Mounted Detachable Bi-Pods. Aluminum Made	$117.00

Command Arms Picatinny Below Mounted Detachable Short Bi-Pods. Aluminum Made

Versatile bipod, mounts onto a Picatinny rail.

Ideal for snipers, sharpshooters & other missions.

	Legs can be attached/detached with two swift movements.
	Due to the included #RB adaptor,allows Picatinny rail for the addition of forearm grip & other devices.
	New recessed design, allows legs to be mounted higher, giving a more stable center of gravity.
	Comfortable rubber covers legs, allowing a non-slip grip.
	Operating the pods separately. Each pod is not depending on the other at all.
	Quick release push button leg extension.
	Legs manufactured from stainless steel.
	No external springs - the whole mechanism is well covered.
	Redesigned feet provide increased stability.
	Legs can be folded to the front or back.
	Strong lightweight design.
	No Gunsmith required • Mill-standard • Warranty: 10 years

Eligibility:
For Picatinny / #SB

Materials:
Made of Alum+Poly

Measurements:
Weight(gr): 375
Height Open(cm): 13.5
Height Close(cm): 17.1

Item Number	Description	Price
CA-NBPS	Command Arms Picatinny Below Mounted Detachable Short Bi-Pods. Aluminum Made	$117.00

Command Arms Side Rail Mount

If you have a side Picatinny rails on your weapon, with the #SB you can fit the CAA
bi-pods(#NBP / #NBPS) on a lower position, so the center of gravity is now even more sable.

Side Picatinny Rail Mount Base For Bipod - Set Of 2. Aluminum Made

	Keeps the lower handguard clean for accessories.
	The whole mechanism is well covered.
	No Gunsmith required • Mill-standard • Warranty: 10 years

Eligibility:
For Picatinny

Materials:
Made of Alum+Poly

Item Number	Description	Price
CA-SB	Command Arms Side Rail Mount	$58.00

Command Arms Bipod

To provide even a lower center of gravity & wider legs spread you can side mount the legs & enjoy a
better stability.Picatinny Side Mounts Bi Pods. Stainless+Polymer Made

Eligibility:
For Picatinny

Materials:
Made of Stainless+Polymer

Measurements:
Weight(gr): 395
Height Open(cm): 18
Height Close(cm): 24.5

Item Number	Description	Price
CA-SBP	Command Arms Bipod	$149.00

Command Arms Bipod

The shorter version of the #SBP

Eligibility:
For Picatinny

Materials:
Made of Stainless+Polymer

Measurements:
Weight(gr): 345
Height Open(cm): 14.5
Height Close(cm): 17

Item Number	Description	Price
CA-SBPS	Command Arms Bipod	$149.00

Universal Featherweight Bipod

	Can Swivel or Remain Fixed
	Easily Adjusts from 9” to 13”
	Weighs Only 6 oz.
	Non-Slip Rubber Feet
	Allows Use of A Sling and Extra Sling Swivel Stud Included
	Mounts to any rifle sling swivel stud
	Includes Stock Protective Pad
	Will NOT Scratch, Rust or Dent
	Hardware Included
	Matte Black
	DuPont® Extreme Temperature Glass Reinforced Polymer
	Limited Lifetime Warranty

Fits: Fits any firearm with a sling swivel stud and AR-15 types

Note:Customer assembly required to determine Swivel or Non-Swivel Configuration or AR-15 Configuration. Push “Snap-N-Lock” Button to Fold Legs Forward, Rearward or Downward.

Universal Featherweight Bipod

Item Number	Description	Price
BIP0300	Advanced Technology Universal Featherweight Bipod	$32.00

Slings

Command Arms Sling

Ideal for tight quarters combat, allowing easy movement when
operating inside tight spaces. One Point Sling.

Textile Made

	Maintains its structure for easy donning.
	Sling easily snaps onto many mounting locations.
	Fully adjustable sling fits all body sizes.
	Quick release side buckle.
	Constructed from 1.5” nylon web.
	Upgraded tubular webbing with fully enclosed bungee portion, allowing for increased durability.
	Ideal to be use with our sling mounts: #OPSM or #OPSMP.
	No gunsmith required • Mill-standard • Warranty: 10 years

Eligibility:
For Sling mounts

Materials:
Made of Nylon

Measurements:
Weight(gr): 136
Length(cm): 80
Width(cm): 4

Item Number	Description	Price
CA-OPS	Command Arms	$35.00

Command Arms One point sling & swivel adaptor

Aluminum & Textile Made

PBSS - Push button design for quick detachment.

S1P - Ideal for tight quarters combat, allowing easy movement when operating inside tight spaces.

	Maintains its structure for easy donning.
	Sling easily snaps onto many mounting locations.
	Fully adjustable sling fits all body sizes.
	Quick release side buckle.
	Upgraded tubular webbing with fully enclosed bungee portion, allowing for increased durability.
	Ideal to be use with our #CB16 buttstock &#RONI systems.
	Position properly & secure.
	Design for left/right handed users.
	No gunsmith required • Mill-standard • Warranty: 10 years

Item Number	Description	Price
CA-OPSPBSS	Command Arms One point sling & swivel adaptor	$49.00

ATI Nylon Sling

	Attaches to any Swivel Stud
	Black Nylon
	Laser Etched Sling Swivel
	Leather Embossed ATI Logo
	Limited Lifetime Warranty

FITS: Any firearm with sling swivel studs

ATI Nylon Sling

Item Number	Description	Price
A.5.10.2260	Advanced Technology Nylon Sling	$17.00

Sights

Command Arms Low profile front flip-up sight

Alum+poly made

	Very low profile & slim shape.
	Can be use as primary or back-up sights.
	Picatinny mount.
	Side operating for both left/right handed users.
	Simple zeroing mechanism.
	No gunsmith required
	Mill-standard
	Warranty:5 years

Item Number	Description	Price
CA-FFS	Command Arms Low profile front flip-up sight	$39.00

Command Arms Low profile rear flip-up sight

Alum+poly made.

	Very low profile & slim shape.
	Can be use as primary or back-up sights.
	Picatinny mount.
	Side operating for both left/right handed users.
	Simple zeroing mechanism.
	No gunsmith required
	Mill-standard
	Warranty: 5 years

Eligibility:
For Picatinny

Materials:
Made of Alum+Poly

Item Number	Description	Price
CA-FRS	Command Arms Low profile rear flip-up sight	$52.00

Miscellaneous AK47 Accessories

Fiberforce Buttpad

	Simply slip-on
	Absorbs recoil
	Adds 1" length

FITS: ATI SKS and AK Fiberforce Stocks

Fiberforce Buttpad

Item Number	Description	Price
SKS0550	Advanced Technology Fiberforce Buttpad	$8.99

Scorpion Six Position Buttpad

	Recoil impact is absorbed - Shooting anything from a 3.5” magnum turkey load to a door breaching load can now be done with no pain being transferred to the shooter
	Reduces the challenge to reacquire the target by minimizing the muzzle lift
	Not affected by chemicals, load size or extreme temperatures
	Eliminates the punch of the recoil
	Removes limitations from spring and piston type recoil suppression systems
	Absorbs the energy wave regardless of the load size which makes it perfect for any type of rifle or shotgun
	Manufactured in the USA
	Limited Lifetime Warranty

Fits: ATI's New 2011 Strikeforce Stocks

Scorpion Six Position Buttpad

Item Number	Description	Price
A.5.10.2300	Advanced Technology Scorpion Six Position Buttpad	$17.00

Other gun accessories too numerous to break down by manufacturer or caliber that may be of interest...

Carlson's Choke Tubes

Amega Ranges Mounts

Ram-Line Stocks

Talley Rings

Weaver Mounts and Bases

Send us a picture of your trophy and we will post it on our caught it, shot it page for all your buddies to see. Email your pictures to office@a2zoutdoors.com with a description and we will post as we receive them.

Your privacy is important to us. Our Checkout page uses the absolute highest level of Internet SSL Security. We do not sell or trade any information.

*Any items marked "OUT" are temporarily out of stock. Please Contact Us to check for availability.

RESTRICTED ITEMS Some of the goods on the A 2 Z Outdoors web site may be restricted in your delivery area by Federal, State, and/or Local law. A 2 Z Outdoors does not, and cannot grant the right or authority to persons to purchase items which may be regulated pursuant to such laws. You must be 21 years of age to purchase anything from A 2 Z Outdoors and it is your responsibility to check Federal, State, and/or Local laws to insure legal possession of such items in the delivery area. Further, pursuant to 18 U.S.C. 922 (D)(1)-(9), you cannot be under a legal disability to purchase certain restricted items.

Policies: Click here for a complete listing of our policies including our Privacy Policy.

A2 Z Outdoors is not responsible or liable for any omissions, errors or inaccuracies in any data or information posted or contained on this site, including but not limited to, product prices, features, specifications and technical data or information. In addition A2Z Outdoors reserves the right to change without prior notice any data and information posted or contained on this site, including but not limited to, any product prices, features, specifications and technical data or information. Online orders are restricted to the USA and Canada only! We accept American and Canadian credit cards only.

AK-47 Strikeforce Stock in Desert Tan

AK-47 Strikeforce Stock, Handguards & Pistol Grip Package in Desert Tan

AK-47 Strikeforce Fixed Stock, Handguards & Pistol Grip Package

AK-47 Strikeforce Fixed Stock

AK-47 Ultimate Professional Strikeforce Stock Package

AK Strikeforce Collapsible, Side Folding Buttstock w/Adjustable Cheekrest & Buttpad

Mako RBT-K47 Collapsible Butt Stock Tube for AK 47 (polymer version)

Mako M4AK M4 Folding, Collapsible Buttstock for AK47

Mako M4AKSB M4 Folding, Collapsible Buttstock w/ Shock Absorber for AK47

Mako RBT-K47FK Collapsible Butt Stock for AK 47 (polymer version)

Mako SBT-K47FK Collapsible Butt Stock w/ Shock Absorber for AK 47 (polymer version)

AK-47 Handguards in Desert Tan with Picatinny Rails

AK-47 Pistol Grip in Desert Tan

AK Strikeforce Pistol Grip

Forend Pistol Grip

AK Strikeforce Handguards (Upper and Lower) with Picatinny Rails & Inserts

AK, MAK-90 Handguard

Mako FFA-T4 Flashlight Adapter with incorporated Grip

Mako MIKI The world's most Ergonomic Flashlight adapter

Mako T-GripR Tactical Foregrip with 1 Inch Flashlight adapter w/ rear Activation

Mako FGG-S Tactical Folding Grip

Mako AG-44S Ergonomic Quick Release Foregrip

Mako TAL-4 Tactical Vertical Grip

Mako TAL-4 Tactical Vertical Grip, Black

Mako TAL-4 Tactical Vertical Grip, Green

Mako TAL-4 Tactical Vertical Grip, Tan

Mako T-POD Tactical Foregrip & Bipod

Mako T-POD Tactical Foregrip & Bipod, Black

Mako T-POD Tactical Foregrip & Bipod, Green

Mako T-POD Tactical Foregrip & Bipod,

Mako TFLTactical Vertical Folding Grip w/ Storage Compartment

Mako TFLTactical Vertical Folding Grip w/ Storage Compartment, Black

Mako TFLTactical Vertical Folding Grip w/ Storage Compartment, Green

Mako TFLTactical Vertical Folding Grip w/ Storage Compartment, Tan

Mako AG-47S Pistol Grip

Mako AG-47S Pistol Grip, Black

Mako AG-47S Pistol Grip, Green

Mako AG-47S Pistol Grip, Tan

Adjustable Cheekrest

Advanced Technology Soft Touch Cheekrest Pad for Shotforce Cheekrest

Universal (FN/FAL) Cheekrest

Mako PLA1 1 & 1 1/8 Inch Tactical Flashlight Mount - Quick Release

AK-47 Mag Covers

2 Inch Aluminum Picatinny Rail with Swivel Stud

2 Inch Aluminum Picatinny Rail

Advanced Technology 4 Inch AK-47 Aluminum Top Picatinny Rail

Mako AKLU-47 Handguard Rail System for AK47/74 - Lower & Upper

Universal Featherweight Bipod

ATI Nylon Sling

Fiberforce Buttpad

Scorpion Six Position Buttpad